Sodium Thiosulphate & Acid Planning To ensure that this experiment is safe, I have taken some precautions. I wore goggles at all times, made sure not to spill any chemicals such as the acid onto skin or clothes, and to be aware of glass. I have used various different apparatus, including two measuring cylinders, one 25ml, and the other 50ml. I used a 150ml chronicle flask and a stopwatch. Here is a few diagrams of these apparatus. What I Will Vary, Not Change To Keep A Fair Test &
The Effect of Acid on Sodium Thiosulphate Aim: My Aim is to see how concentration of acid will affect the time it takes for Sodium Thiosulphate to become cloudy and make a cross below it to disappear. Method: Apparatus Hydrochloric Acid Sodium Thiosulphate Distilled Water 250cm ³ Beaker- I need a beaker big enough to see the cross and although the 100cm³ would be perfect volume wise I would prefer to use a bigger one so I can fit the cross under it and also be able to pour
The higher the temperature of the sodium thiosulphate the faster the reaction of the two liquids. Information. According to the kinetic theory all matter is made up of tiny, invisible particles that move all the time. When the temperature is increased around or on these particles, the faster they move. Heavier particles move more slowly than light ones at a given temperature. This theory defines the differences between solids liquids and gasses; in a gas the particles move freely and
Sodium Thiosulphate Rates of Reaction During this investigation I am going to investigate the rates of reactions and which changes will affect this rate. A rate of reaction is when a reactant is lost or a new product is formed during a chemical reaction. I am going to investigate the effect of concentration by mixing Sodium Thiosulphate, Hydrochloric Acid and H2O (water) until the reaction takes place and the mixture goes cloudy and the newspaper beneath the flask can no longer be read
Reaction of Hydrochloric Acid and Sodium Thiosulphate In this investigation I am going to investigate how fast the chemicals Hydrochloric Acid and Sodium Thiosulphate react. The four main variables that affect rate are: * Temperature - if the reactants are heated/cooled they have more/less energy. If they have more energy there is greater chances of successful collisions meaning the reaction occurs faster. * Concentration - if the solution is more concentrated there are more reactants
Acid, Sodium Thiosulphate Reaction Research: "Hydrochloric acid is a strong colourless acid formed when hydrogen chloride gas dissociates in water, used in industrial and laboratory processes. Hydrochloric acid is also produced in the stomach, where it initialises the digestion of proteins. Sodium thiosulphate is a white crystalline salt used as a fixer in photography and as a bleach." Encarta World English Dictionary When hydrochloric acid reacts with sodium thiosulphate, sulphur
The relationship between the concentration of Sodium Thiosulphate and the reaction rate with Hydrochloric acid Introduction The rate of reaction is measured by finding the quantity of product made in a certain time. The rate of reaction can be made faster by an increase of temperature, adding a catalyst, increasing concentration or pressure or making the reactants surface area larger. An increase in temperature causes the particles of the reactants to gain more energy and move faster. Collision
Reaction Between Hydrochloric Acid and Sodium Thiosulphate Introduction I will be conducting two experiments to determine how two factors affect the rate of reaction in the reaction between hydrochloric acid and sodium thiosulphate. It is a precipitation experiment. The equation allows us to see how this experiment will help us find how rate of reaction changes Sodium thiosulphate + Hydrochloric acid ---- Sodium chloride + Sulphur + Sulphur dioxide + Water Na2S2O3 (aq) + 2HCl(aq)
Sodium Thiosulphate and Hydrochloric Acid Reaction Investigation Aim To see the effects of concentration on the rate of a reaction between sodium thiosulphate and hydrochloric acid. Background information The collision theory briefly: For a reaction to occur particles have to collide with each other. Only a small percent result in a reaction. This is due to the energy barrier to overcome. Only particles with enough energy to overcome the barrier will react after colliding. The
Concentration of Sodium Thiosulphate in the Reaction Between Hydrochloric Acid and Sodium Thiosulphate Introduction The reaction equation for this experiment is: Sodium Thiosulphate + Hydrochloric acid = Sodium chloride + Sulphur dioxide + Sulphur + water Plan Input variable: Concentration of Sodium Thiosulphate. 1) 5ml Sodium Thiosulphate 25ml water 2) 10ml Sodium Thiosulphate 20ml water 3) 15ml Sodium Thiosulphate 15ml water 4) 20ml Sodium Thiosulphate 10ml water 5) 25ml
The Reaction Between Hydrochloric Acid and Sodium Thiosulphate Introduction ============ I am investigating how different concentrations of thiosulphate and distilled water in ratio to 10cm³ of hydrochloric acid affect the rate of reaction. I will also investigate if there will be a change in temperature after the reaction has occurred. I will know when the reaction is taking place as the solution turns from clear to opaque. The reaction that takes place is as follows: - Sodium
The Reaction of Sodium Thiosulphate with Hydrochloric Acid Plan ==== I am going to investigate the rates of reaction when sodium thiosulphate reacts with hydrochloric acid. The rate of reaction is the rate of loss of a reactant or the rate of formation of a product during a chemical reaction. It is measured by dividing 1 by the time taken for the reaction to take place: 1 [IMAGE] Seconds ------- There are five factors, which affect the rate of a reaction, they are:
Concentration on Reaction Rate with Sodium Thiosulphate ---------------------------------------------------------------------- Planning ======== In this experiment I shall be varying the volume of sodium thiosulphate, hydrochloric acid and water, and measuring the reaction rate. When I increase the amount of sodium thiosulphate with less water, I think the time for the cross to disappear would be faster than there would be with little sodium thiosulphate and more water – taking in account
Rates of reaction:- sodium thiosulphate + hydrochloric acid Plan:- We must produce a piece of coursework investigating the rates of reaction, and the effect that changing one particular variable has on the reaction time. The rate of reaction is the time it takes one or more of the reactants to react or the time it takes to produce a new product from a chemical reaction. To work out the reaction time we use the formula. 1 divided by time taken for reaction There are five factors which
Between Sodium Thiosulphate and Hydrochloric Acid Aim: I am going to investigate how changing the concentration of Sodium Thiosulphate affects the rate of reaction with Hydrochloric Acid. I am going to time how many seconds/minutes it takes until you can no longer see the black cross on a piece of paper under the beaker. Each time I do the experiment, I will change the amount of thiosulphate and water in the reaction mixture. I want to find out if the concentrated thiosulphate makes the reaction
when the concentration of Sodium Thiosulphate is altered in the reaction between Sodium Thiosulphate and Hydrochloric acid. Rates of reaction investigation Aim The aim of this coursework is to investigate what happens to the rate of reaction when the concentration of Sodium Thiosulphate is altered in the reaction between Sodium Thiosulphate and Hydrochloric acid. Below is the reaction equation Sodium + Hydrochloric Sodium + Water + Sulphur+ Sulphur Thiosulphate acid Chloride Dioxide Na2S2o3
The Rate of Reaction Between Sodium Thiosulphate and Hydrochloric Acid Theory: Sodium thiosulphate and hydrochloric acid, react together to produce sulphur as one of the products Na2S2O3 (aq) + 2HCl (aq) Sodium Thiosulphate + Hydrochloric acid à 2NaCl (aq) + H2O (l) + S (s) + SO2 (g) Sodium Chloride + Water + Sulphur + Sulphur Dioxide Sulphur is a yellow precipitate, so the solution will turn an opaque yellow colour while the reaction is occurring. The reaction will continue
Rates of Reaction - Sodium Thiosulphate and Hydrochloric acid In this piece of coursework, I will study how concentration affects the rate of reaction. I will do so by timing the reaction of Sodium Thiosulphate with an acid. In this coursework, I will include background knowledge, prediction, safety, results, calculations, graphs, an analysis, conclusion and an evaluation. In my evaluation I will comment on how reliable my results were and how I could have improved my coursework in any possible
The Rate Of A Reaction Between Hydrochloric Acid And Sodium Thiosulphate Aim: I am going to investigate the effect of changing the concentration of Sodium Thiosulphate on the rate of the reaction between Hydrochloric Acid and Sodium Thiosulphate. Prediction: I predict that as the concentration of the Sodium Thiosulphate doubles, the rate of the reaction will double. I believe that when the most concentrated solution is used the reaction would be at its fastest. Collision Theory: In
Rate of Reaction - Sodium Thiosulphate and Hydrochloric Acid Aim Investigation, to find out how the rate of reaction between Sodium Thiosulphate and Hydrochloric acid is affected by changing the concentration. Introduction I must produce a piece of coursework investigating the rate of reaction, and the effect different changes have on them. The rate of reaction is the rate of loss of a reactant or the rate of development of a product during a chemical reaction. It is measured by dividing 1 by