A flake is a piece of raw material that has been removed by a variety of removal techniques. Diagnostically there are five flake types I describe more in depth in question four. In order to produce the desired flake the flintknapper can utilize either percussion or pressure flakings in order to remove the flake from the raw material. At the removal of a flake a wide range of characteristics can be annotated. Location of the platform aids in identifying the initial impact area and orientation of the
Punk Rock and Jamaican SKA are two very well-known music genres, but they are not as popular as they were when they first began. However there still is a huge fan base that likes to keep the music and culture of both genres alive. Also both music styles come from different countries, but stand for a similar meaning. When one hears the sound of the music it is easy to tell apart which music style is which, but many of the early punk bands were influenced by ska which started a huge connection that
Flange joint is one of the methods of pipe joints. Pipe flanges are used at places where piping, instruments, valves, equipment etc. are required to be dismantle for maintenance. Flange joint is an assembly of three different components: Flanges, Gaskets & Bolting brought together in a proper method by some external source. Special measures shall be considered in selection and application of each component of the joint to achieve acceptable leak tightness. The flanges are normally made of forging
Introduction: Sheet Metal Forming is a process of making a flat sheet metal into a desired shape part without excessive localized thinning or Fracture. This following report on sheet metal forming consists of forming study of two components one given in the course and an another outside of our field of work, it details the materials used and their metallurgical properties and alternative materials that can be considered. Detail the forming process used and an alternative route. Also Detail the