BACKGROUND Composite restoration usage in dentistry is increasing. Because of this interest in the longevity and reliability of composite fillings also is increasing1. One problem that can occur with composite restorations is micro-leakage. This is when microgaps at the tooth-restoration interface allow fluids and bacteria into the restoration2. These gaps are formed when the material is polymerized and shrinks, which causes the material to pull away from the margins of the preporation2. Problems that can arise from micro-leakage are secondary carries, hypersensitivity, pulp stimulation, and marginal discoloration3. This is why dentists are trying to find ways to reduce micro-leakage of composite restorations. RESEARCH There are many different areas that can be looked at in attempting to find ways to reduce micro-leakage of composite fillings. Liners In comparing micro-leakage of resin-modified glass-ionomers (RMGI), flowable composite liners, and no liners, it was found that by applying a RMGI liner before placing the composite decreased the extent of micro-leakage3. By doing this, the farthest the micro-leakage occurred was to the cervical wall, whereas with composite liners and no liners there was leakage to the cervical wall and into the axial wall3. The reason for the difference could be attributed to the bond between the glass ionomer and composite. This bond is weak and can be thought of as an unbounded wall, leading to less shrinkage stress to the bonds between composite and dentin3. Desensitizers If desensitizers are used before adhesives this adds a new layer to the restoration and there could be a difference with marginal sealing. On enamel there is no effect with reducing or increasing micro-leakage however whe... ... middle of paper ... ...bamide Peroxide In Vitro. Operative Dentistry 2010; 35(6): 634-40. 6. Khosravi K, Ataei E, Mousavi M, et al. Effect of Phosphoric Acid Etching of Enamel Margins on the Microleakage of a Simplified All-in One and Self-etch Adhesive System. Operative Dentistry 2009; 34(5):531-36. 7. Bagis Y, Baltacioglu I, Kahyaogullari S. Comparing Microleakage and the Layering Methods of Silorane-based Resin Composite in Wide Class II MOD Cavities. Operative Dentistry 2009; 34(5):578-85. 8. Karaman E, and Ozgunaltay G. Polymerization Shrinkage of Different Types of Composite Resins and Microleakage With and Without Liner in Class II Cavities. Operative Dentistry 2014; 39(2):00-00. 9. Afshar H, Jafari A, Khami M, et al. Evaluation of Microleakage in Composite-Composite and Amalgam-Composite Interfaces in Tooth with Preventive Resin Restoration. Journal of Dentistry 2012; 9(2):128-34.
Pit and fissure sealants are tooth coloured materials that are applied on the occlusal surfaces of the posterior teeth in deep grooves, pits and fissures. They protect the tooth from various bacterial plaques in these caries prone areas of the teeth. The sealants protect these areas by sealing of the entrance to bacteria which give rise to dental caries in susceptible individuals especially in children. Pit and fissure sealants are now commonly being used due to the increase in the awareness among public about dental caries prevention
...at more tentatively, with fluoride gels and varnishes or a chlorhexidine varnish. Some dentists may restore root caries with amalgam restorations. Another treatment option used by some dentists to restore root caries is Glass Ionomer Cements. Glass ionomer cements were first introduced in the early 1970s. They have good adherence to mineralized tooth tissue, which keeps the removal of tooth structure to a minimum. Glass ionomer cements also have the ability to leak and absorb fluoride into the tooth, which decreases the rate of secondary caries. These factors have increased the potential for glass ionomer cements to replace amalgam as a restorative material. (Hammel)
Tooth surfaces are referred to by various names in dentistry, including mesial, distal, buccal, and lingual. If you drew a midline t...
The biggest shortcoming of these archaic appliances was the fact that they were subject to decay in the wearer’s mouth. Thus, installed false teeth would have to be replaced on a regular basis, resulting in a very costly procedure. However, this problem was rectified in 1774 by Duchateau and Dubois de Chemant with their invention of the first full set of dentures that would not rot. This was due to their porcelain composition – a material that was much more conducive to the everyday wear and tear of one’s teeth. Although an incredible improvement, even the porcelain version had its difficulties. Unable to produce anything less than a full set of teeth (the surrounding porcelain was required to keep each tooth in place), patients who were missing only one or two teeth were out of luck, unless they were willing to have the rest of their teeth removed as well. And yet, in 1808, Giuseppangelo Fonzi developed the first individual appliance – a single porcelain tooth that could be held in place by a pin drilled into the jawbone. Finally, in 1845, Claudius Ash, known as the official “inventor of dentures”, produced the porcelain version that is now used today. His contributions included a suction method of adhesion for a full set of dentures, so that no form of attachment could be seen by an onlooker.
Dr. Gary Silva and his team are highly trained and experienced in providing restorations for all sorts of dental issues. We offer complete and partial dentures, tooth-colored fillings, crowns, bridges, and more. Dr. Silva’s unique background gave him real restorative experience early in his career. For more than 20 years, Dr. Silva has been offering patients the chance to gain a beautiful, functional smile with his restorative dentistry.
Adhesion of resin materials to tooth structure has been a challenge in the history of adhesive dentistry. Currently, bond durability is one of the main research topics in adhesive dentistry. Regardless of the improvements in bonding technology, resin dentin bonds show limited durability for both etch and rinse and self-etch adhesive systems.
... teeth was 79% and 65% in the permanent first molars. The arrest rate for caries on both permanent and primary teeth was 77%. In comparison, a study done on children in Greenland, the arrest rate for dentinal caries applied with just NaF varnish was only 33%(Ekstrand, et al; 2010)
After the treatment and procedure is complete, patients leave with healthier, more beautiful teeth, giving them the confidence to ask someone out on a date or the confidence to smile on an important job interview. Dentistry is and has been for centuries, an important aspect of people’s ...
Denture teeth can be made of acrylic poly(methyl methacrylate) (PMMA) or composite resins. PMMA is a polymer - a material made the from joining of methyl methacrylate monomers. Properties of PMMA include resistance to abrasion, chemical stability and a high boiling point. (Jun Shen et al. 2011). However, weak flexure and impact strength of PMMA are of concern as they account for denture failure. (Bolayir G, Boztug A and Soygun K. 2013). Composite denture teeth are made of a three distinct phases - filler, matrix and coupling agents. Out of the types of composite teeth available, nano-filled composite teeth are preferred. Composite teeth have a PMMA coating around the tooth and a high content of filler particles. This gives them strength, higher resistance to forces than acrylic teeth and provides compete polymerization due to the PMMA coating. (Anusavice, K. J., Phillips, R. W., Shen, C., & Rawls, H. R, 2012). If the interface between the PMMA denture base and PMMA or composite teeth was weak, the denture will not be able to sustain occlusal forces, making the base-teeth interface, an entity of significance.
The future of dentistry is the end of the use of amalgam restorations. Amalgam restorations are believed to be the cause of many illnesses for dental professionals. Dental professionals are exposed daily to the harmful chemicals contained in the material that makes up amalgam, including mercury. With the advent of resin restorations and their more popular use, amalgam restorations will be a thing of the past, only read about in dental history books.
The existence of micro-leakage in dental restorations was first identified in scientific research in 19126. In a study done by Harper (1912), air pressure was used to penetrate the surface between an amalgam restoration and cavity preparation7. By applying pressure through a hole in the pulpal floor, Harper could quantify the amount of pressure needed to establish leakage through the emergence of bubbles from the margins of the restoration. Research has come a long way since Harper first recognized micro-leakage. Adaptations of new materials used when placing composite restorations like BondAband, a light-cured glass-ionomer cement has been shown to reduce marginal micro-leakage in posterior restorations8. A decrease in microleakage has also been shown with the use of an ...
Dental plaque is broadly classified as supragingival or subgingival based on its position on the tooth surface toward the gingival margin. Supragingival plaque is found at or above the gingival margin. Therefore, it can be further differentiated into coronal plaque, whi...
...because the residual oxygen from the whitening gels created an oxygen-inhibited layer. It is recommended that clinicians delay the placement of bonded restorations until 1-3 weeks after treatment (Can-Karabulut et al 2011).
Impression materials are used to register or reproduce the form and relations of the teeth and the surrounding oral tissues (1). Making an impression represents a critical step in processing and fitting of a dental prosthesis (2). Several types of impression materials are produced. These include silicones, polyether, polysulfide and alginate which are available for crowns and fixed partial denture impressions. Silicone impression materials are considered to be suitable impression materials to use for fixed prostheses (3). Also, it has been reported that silicone has the ability to remain dimensionally stable through disinfection procedures (4). Among silicone impression materials, one type of them, called polyvinyl siloxane (PVS) is reported
Cosmetic dentistry is a specialized field that deals with improving the aesthetics of teeth and the human face. The teeth are an important part of human beauty. Even minor damage to the teeth, such as breakage or loss can drastically alter the overall appearance of the face. This is where cosmetic dentistry comes in to restore beauty. Cosmetic dentistry has become a highly specialized branch due to various advancements in surgical procedures and diagnostic techniques. Several new materials have also been discovered. These materials are very close to the natural enamel and bone from which teeth are made and are virtually indistinguishable. Cosmetic dentistry is an option in conditions such as teeth loss, gaps between teeth, cracked or chipped teeth, cavities and dental