Over the course of the recent past, universities across the U.S. have been faced with decisions on admissions. What was once popular, affirmative action, is now fading with a long past of problems, and new programs are entering into the picture. The University of Dayton and many others are taking actions to improve the standards of their students, regardless of race and background. These new concepts are reflecting higher academic progress, and increase in prestige and national reputation. By basing selection on academic ability and incorporating improved recruiting techniques, the nation would be filled with greater college standards and no use for an old and tiring affirmative action process.
With the lawsuits that took place beginning in 1997, involving the University of Michigan, it is clear to see that the process of recruitment is in need of reform. Many problems arose from this lawsuit. A college that is as well known as Michigan, to have such problems as alleged preference to minorities, opened the eyes of many administrative officers at other colleges. The problems that surfaced from that ordeal were clearly brought to the public’s attention.
The problems exhibited in Michigan were based on the university’s point admission process. This was a major problem. By awarding points to students, based solely on being a minority, living in the state, and have athletic ability, eliminated many students that had a great deal of academic ability. This statement was issued after the lawsuit went public, by the university president.
In our undergraduate admission system, fully 110 points out of 150 are given for academic factors including grades, test scores, and curriculum. We only count 12 points for test scores, but that is because we value high school grades to a much greater extent--- they can earn up to 80 points. We consider many other factors as well. Race is one of those, but a student who is socioeconomically disadvantaged also can earn 20 points (students cannot earn 20 points for both factors, however). Geographic diversity is also important, and a student from Michigan’s upper peninsula, for example, earns 16 points.
scientific experiments (Go welding: history of welding 1). Conventional welding is most easily explained as arc welding processes. Some arc welding processes are TIG welding, Stick Welding(SMAW), and MIG welding. TIG stands for Tungsten Inert Gas welding this means that using tungsten as a electrode and an inert gas, which is usually argon, the weld is produced by creating an arc between the piece being welded and the tungsten electrode. SMAW or stick welding utilizes a stick electrode held in a clamp surrounded by a powdered substance to weld. Mig welding uses a machine that holds a wire feeder within it, the wire feeder feeds the wire electrode through a tube to a gun that slowly sends out the wire as well as a steady flow of inert gas. These and other processes classified as conventional welding processes are the best processes for welding jobs because they are more cost effective, more...
During this time more steps were taken to develop a legend by giving the troops a form of National Identity and calling them The Anzacs. We know now that it is now a part of Australia’s cultural identity and origin on the battlefield.
Peter Weir’s 1981 film Gallipoli can in every sense of the phrase be called an ‘Australian classic’. The impact and effect this film has had upon the psyche and perspective of several generations of Australians has been significant. Whilst it can be argued that every Australian is aware of the ANZAC legend, and the events that occurred on the Turkish beaches in 1915, Weir’s film encapsulates and embodies a cultural myth which is now propagated as fact and embraced as part of the contemporary Australian identity. The film projects a sense of Australian nationalism that grew out of the 1970’s, and focuses on what it ‘means’ to be an Australian in a post-colonial country. In this way Gallipoli embodies a sense of ‘Australian-ness’ through the depiction of mateship and through the stark contrast of Australia to Britain. A sense of the mythic Australia is further projected through the cinematic portrayal of the outback, and the way in which Australia is presented in isolation from the rest of the world. These features combined create not only a sense of nationalism, but also a mythology stemming from the ANZAC legend as depicted within the film.
Last summer, the Supreme Court ruled against the use of race in the college admissions process in the case of Fisher v. University of Texas. Since then, affirmative action has become a big issue in the media; however, many people still do not even know what affirmative action is. Affirmative action is a policy to prevent discrimination on the basis of “color, religion, sex, or national origin.” Overall, it favors minorities that are often discriminated. It might sound like an excellent policy; however, the use of this policy in the college admissions process is prejudice. In the college admissions process, affirmative action lowers the standards for some races, while raising the standard for other races. For example, an Asian might need a SAT score of 2300 to be considered for admission at a top school such as Yale and a white applicant might need a score of 2100, while an African American or Hispanic only needs a score of 1700. While affirmative action provides equality in the workplace, it has no place in the college admissions process and should, therefore, be abolished and replaced. This type of policy can be repealed completely, replaced with a college admissions process that favors first generation college applicants, or replaced with a policy based on an applicant’s socioeconomic status.
Affirmative action is without a doubt, one of the most controversial and debated political topics found throughout the entirety of the history of the United States, especially in regards to college admissions. On both sides of the argument, you have millions of Americans vitriolically defending their beliefs as to whether or not affirmative action is a positive thing that benefits the entirety of America as a whole, or rather an outdated model existing well past its expiration date. Both sides of the argument have its pro and cons, but personally, I am of the opinion that affirmative action in regards to college admissions does more harm than good for America as a whole on a social, political, and economic level, and that it at the very least needs to be modified heavily, if not abolished altogether. However, in order to first understand the arguments both supporting and decrying affirmative action, as well as the controversy behind it, we first need to delve into its history for the related context.
Racial preference has indisputably favored Caucasian males in society. Recently this dynamic has been debated in all aspects of life, including college admission. Racial bias has intruded on the students’ rights to being treated fairly. Admitting students on merit puts the best individuals into the professional environment. A university’s unprejudiced attitude towards race in applicants eliminates biases, empowers universities to harness the full potential of students’ intellect, and gives students an equal chance at admission.
Known as one of the biggest obstacles in higher education to date would arguably be the use of affirmative action within the higher education admission process for both private and public institutions (Kaplin & Lee, 2014; Wang & Shulruf, 2012). The focus of current research is an attempt to either justify or deny the use of affirmative action within current practices through various higher education institutions, and though any one person could potentially be swayed to side with the rationale to maintain its use or disregard, the facts are quite clear that the future of this practice is unclear. Therefore, this essay will present current research in an attempt to determine if affirmative action should continue to be used within college admission decisions.
Discrimination is still a chronic global issue, and drastic inequalities still exist at the present time. Thus, the Affirmative Action Law is an important tool to many minorities most especially to women, and people of color, for the reason that this program provides an equality on educational, and professional opportunities for every qualified individual living in the United States. Without this program, a higher education would have been impossible for a “minority students” to attain. Additionally, without the Affirmative Action, a fair opportunity to have a higher-level career...
Same as Electron Beam Welding (EBW), laser beam welding also has a high power source of order of 1 MW/cm2 which results in small/concentrated heat-altered zones and high heating and cooling rates. The spot size or the focused area of the laser varies between 0.2 mm to 13 mm, due to smaller focus spot its makes the welding laser accurately and precisely. The depth of penetration is proportional to the amount of power supplied but it is also dependent on the location of the focus point. The penetration is maximized when the focus point is slightly below the surface of the work piece.
It works by three main ingredients. Electricity, filler metal, and a form of shielding from the air are very important (gowelding para 2). “Just like MIG welding, Flux Core welding works by feeding an electrode continously to the joint” (gowelding para 2).The first step is the welder squeezes the trigger and a spool of wire is fed to the joint into the arc. As soon as the electrode hits the metal it heats it up until the wire and weld area begin to fuse together. Once the puddle is made the Flux Core creates a shield from the air (gowelding para 2). The power supply is a constant voltage power supply. This means the welding machine uses a direct current just like MIG welding, as the same machine is used for both types of
GMAW (Gas Metal Arc Welding) is more economic; Springer reports that “ GMAW is an economic process because it has higher speeds and higher deposition rates than manual arc welding. There is also no need to constantly change electrodes” ( Page 11). GMAW has a higher speed, which means that you can get the job done faster. It also has high deposition rates which makes the weld look clean and smooth.” This method can be used for a high range of work, but it is not suited for repair work because of it’s weld quality” (Page 4). This process can be used for many variations of work including root welds, joints, T’s, butts, laps, and many more applications. Even though its used for many practices, it is not recommended to use this method for repair work because of the quality of the welds. “ It’s easy to use and it is inexpensive to afford now with 110v machines. But you cannot weld for a long time like a 220v machines would produce. Both have different duty cycles” (Parag. 7). M.I.G is something anyone can learn easily, it’s inexpensive to afford. 110v machines don't bring out the best power to weld, because these machines do not have a good duty cycle. Most people prefer 220v machines because they produce more work, even if they are more expensive. GMAW is the cheapest most reliable process for welding.
I have not worked as a Consular in an embassy of my country but have performed similar duties many a times in different roles over my career. I love training and learning new skills. It always brings something new in me. I have no such problems of traveling to UK or various parts of Middle East for learning and development.
Heat in friction welding is generated by the conversion of mechanical energy into thermal energy at the interface of work pieces during rotation under pressure. Various ferrous and non-ferrous alloys having circular or non-circular cross sections and that have different thermal and mechanical properties can easily be joined by the friction welding method. Friction welding is classified as a solid-state welding process where metallic bonding is produced at temperatures lower than the melting point of the base metals. Friction time, friction pressure, forging time, forging pressure and rotation speed are the most important parameters in the friction welding method
?Automation Reduces Weld Spatter? Welding Design & Fabrication (Jun. 2001): 37 EBSCOhost. Online. Nov. 2002 .
weld is being formed on the metal. When the welder strikes an arc it is