Wait a second!
More handpicked essays just for you.
More handpicked essays just for you.
Snowboarding physics
Basics of snowboarding essay
Simple physics and snowboarding
Don’t take our word for it - see why 10 million students trust us with their essay needs.
Interestingly enough, snowboarding was invented by Sherman Poppen in North Muskegon, Michigan, back in 1965. Nowadays, snowboarding is considered one of the most popular winter sports among teenagers. On the other hand, there are many people that don’t have the slightest idea how to ride a snowboard straight down a hill. There are four steps to learn the basic skills of snowboarding. First, you will need a snowboard. Make sure that you also buy the boots and bindings, if they do not come in the same package with the board. You will need to dress in a comfortable, loose-fitting outfit to allow flexibility. Never disregard your safety. Gloves, goggles, helmet, and wrist guards are a must, especially for beginners. Assuming that you are at a resort, now you will have to get into the bindings. With the boots on your feet, select a flat area with the snowboard in front of you, and place your front foot in the front binding. Strap both the toe and ankle strap until they are secure. Repeat with your back foot. Bounce around a little bit to see what it feels like to be strapped into a snowboard. Now, take out just your back foot and leave your front foot in its binding. Next, take a few steps up a slight incline with your front foot in the snowboard binding and your back foot out. Make sure that the snowboard is perpendicular to the incline. Take one step with your foot that is not attached to the snowboard, then lift your foot with the snowboard attached to it and take a step with the entire snowboard. Keep taking baby steps until you are up an incline. The process can become tiring after a while, but for beginners the ski-lift is not quite recommended at this point. You should be looking for beginner slopes with a very small incline. Now that you are at the top of a slope that is comfortable for you, sit down and strap both feet into the snowboard. Now, with your snowboard perpendicular to the slope, stand up so you are looking down. Your weight will be mostly on your heels. Now point your toes on both feet just a little bit and you will start to slide down the hill. Always watch where you are going, and make sure that your hands are slightly away from your body.
Whether zipping along a winding trail, flying through the open flats, or powering up a steep hill, snow machines and the rider need to use physics to stay in control of the machine and themselves. The main components are the track, engine, skis and riding. Snowmachine tracks are essential to making a snowmachine move. Ever since snow machines first originated in the late 50's, designers have been finding ways to improve traction in a variety of conditions. Some of these conditions are driving on groomed trails, not groomed trails, overflow, and deep snow.
Another type of wax is applied to the "kicker". The kicker is the area under the bindings. In other words the kicker is the area where most of the gravitational force of the skier is applied. Skiers apply a type of wax to the kicker that will cause the friction coefficient to increase. This allows skiers to be able to push off and ski uphill.
Second, before hopping on the lift, you should become familiar with the parts of the snowboard. Always wear the right size boots, and make sure they support on your ankles. Wearing boots that are too tight can leave you with sore ankles or chin splints. After choosing the perfect boot, consider your choice of binding. The bindings are what clip your boots to the board. There are two different types of bindings. The clipping binding has a calf support in the back, and has two clips that snap around your boot. This type of binding is the safest. The other type of binding, the step-in, is made to just step directly on the board. This one has no safely clip or back support. It is less of a hassle, but most people do not feel as safe in them. I suggest the clipping binding, because I feel the extra support on my calves gives me more control. Once you have decided on the binding, choose your board. Snowboards are made customized. They vary in length and
Snowmobiling in today’s world is far more exciting and dangerous than it used to be in the 20th century. There are many types of snowmobiles and different capabilities for every make, model, and year. Every single snowmobile is different in its own way. Many snowmobiles have evolved and developed into amazing machines that are a great source of entertainment.
After being mesmerized by figure skating at the age of eight, I became a member of the Markham Skating Club. As a competitive figure skater, I must perform various jumps and spins in a choreographed program. I have participated in numerous competitions in Central Ontario and have received multiple medals for my achievements. Yet, my achievement as a figure skater stem from the adversity that I faced throughout my skating journey. This sport has imposed challenges to both my mental and physical strength that have ultimately constructed the qualities of dedication and humility within myself.
Throughout time, the progression and evolution of snowboarding has increased greatly. It has gone from non existence in the late 1970’s, to one of the most watched action sports in a matter of thirty-five years. The upward takeoff and popularity of snowboarding relies on two people, Jake Burton and Shaun White. Jake Burton back in 1977 had the vision for what snowboarding would be, but Shaun White had what it took to manifest that vision. Evidence has shown that time brings change in sports, history has repeated itself with snowboarding, this history reflects the time & changes that has occurred in America.
Imagine being on the top of the world, on a bitter cold mountain, over top of an enormous crowd. Below where you stand, the lustrous lights are shining on a massive jump, that seems larger than the mountain itself, created for the professional snowboard competition. This gargantuan jump will decide whether you win or lose the competition. Becoming a professional snowboarder has been a dream to me ever since I first was beginning to snowboard. Being on top of the enormous slope and strapping into my bindings instantly made me relaxed and put a grin larger than the slope itself on my face. Everytime I glide down the face of the mountain I become focused and dialed in on my riding. When becoming a professional snowboarder as an occupation, I would
The typical snowboard is designed to face the toughest conditions in any climate, even though it's use is mainly during the winter. In general, a snowboard is composed of several layers to attain a durable, yet light structure. Making the surfaces of a snowboard with a minimal friction coefficient is essential in the snowboard manufacturing industry.
Once in the water, one should slip their feet into the boots and adjust them for a proper fit by tightening them securely around one’s ankles for support. After the boots are secure, the driver will hook one end of the ski rope to the boat and toss the handle to you. When you have the rope in your hands, bend your knees a little bit with the board at a ninety degree angle in front of you. As the driver slowly accelerates, the rope will tighten, pulling you forward a bit. At this point, it is your responsibility to signal to the driver that you are
As a 29-year-old medical school applicant for which I have spent 23 of them in the world of competitive figure skating. For 19 years I was a competitive figure skater, competing at both the local and national level. Figure skating was my way of life, it guided every decision I made, whether I could go hang out with friends, go on family vacations, or what types of activities I could do so that I would not become injured, hampering my skating career. In the middle of my season in 2009 such injury occurred, I was diagnosed with a bulging disc partially caused by a grade one spondylolisthesis between my lumbar and sacral vertebrae. I was told that this was the end of my skating career, I would never be able to compete on that sheet of ice that
either seen a snowboard, ridden one, or knows someone who has. The purpose of this
If anyone has ever heard about or watched skiing it is probably alpine skiing. Alpine skiing is the most traditional and popular type of skiing. Some of the necessary pieces of equipment needed for skiing are, helmet, gloves, ski pants and jacket, goggles, ski poles, ski boots and bindings, and last but not least skis. There are ten alpine skiing events in the olympics they vary from Downhill and Slalom, to Moguls and Slopestyle. Alpine skiing has been around since about 600 BC in modern day China. Earlier skiers used one big pole or spear not two like modern day skiers. Until the mid 19th century skiing was only used for transportation, but since then it is mainly used as a recreational sport.
One way I succeeded was by practicing. Everyday I would go to the hill in my neighborhood and practice. I would practice stopping, keeping my balance, and locking my ankles in place so my board wouldn’t shake. I would spend all evening after school riding down that hill and if it was the weekend, I would be outside all day! I brought my skateboard with me everywhere and I would practice on any hill I saw until my legs and feet hurt, I was determined to ride down that hill.
Snowboarding, one of the hardest snowsport to learn but easy to master, it's also one of the most enjoyable snowsport on the planet. Even though it’s fun, you can really injure yourself if your not careful. In this narrative you’ll witness the pain I had to go through trying to learn snowboarding but also witness me mastering this incredible sport. It was a cool afternoon in the frosty month of January, the time was around 5:30 pm and my dad just dropped me off at Snow Valley hill in his black Mitsubishi Lancer. I took my blueish green Burton Custom snowboard from the back of the car, grabbed my helmet, gloves, jacket and snowpants and went to the bottom of the hill. There I placed my board on the soft snow and put on my gear. I was wearing a blue jacket with dark
I don’t remember the exact time when I was first introduced to skateboarding, it was probably around 6th or 7th grade. I remember my “skater” phase well (face palm). Anyway, fast forward a few years and I’m off to college. I was at Auburn University. The campus has lots of hills and slopes, very rough on the shoes. One of my friends, who also rode boards, would let me borrow one of his boards to ride around sometimes, and he would try to teach me how to control the board better. One day, he came to the student center where people often hung out to do work and whatnot with a new board he just bought. He got it from Goodwill, practically new, and since he had a lot of other different boards, he let me have that one. I was pretty psyched, I wanted