Introduction
So as a user who just built a computer, I used a full size ATX motherboard with 2 DDR3 4GB cards, Intel i7-4940MX 64 bit, AMD Radeon R9 graphics card. I tried turning my computer on and nothing happens. The fan comes on for a brief second then shuts off. I should also say that when I hit the power button no LEDs come on. There are also no beeps when I hit the power button. And finally the screen does not come on as well. I have made sure all the plugs in the back are in the right jack and tight, which they are. I have also opened the case and there were no loose parts. The computer is also in a well-ventilated area so it can get air passing through; it is not in a corner or anything. When I was putting together my personal computer, I did just break up with my girlfriend so it is possible when I was putting together my computer I may have forced something, but I went in and checked the RAM and the DVD drive, the PCI video card and so on, and everything was not broken and not lose. Now thinking about it, when I was installing the processor I did hear a grinding sound but I ignored it because I was still able to close the processor latch. I should also mention that this is my first computer that I have built myself. I have had many computers in the past, but this was the year I thought it would be worth it to build my own personal computer. I asked a friend of mine who is pretty good with computers to come over and take a look to see if he could find the problem. He took all ram cards out, the video card out, the DVD drive, the power supply, and he looked at all the connectors and he could not see an issue with anything so I put it all back in. He also wore one of those anti-static wrist bands so he would not cause any ...
... middle of paper ...
....com/od/findbysymptom/ht/nopowertopc.htm (accessed April 18, 2014)
My computer will not turn on, Puget Systems, [Online 2014], https://www.pugetsystems.com/help/troubleshooter.php?id=20 (accessed April 18, 2014)
Julia Saveliev, Juan, Chris Hadley, “How to Fix Bent Pins on a CPU”, (Wiki How), [Online], http://www.wikihow.com/Fix-Bent-Pins-on-a-CPU, (accessed April 19, 2014)
NCIXcon, “Fixing a Bent / Broken Pins on a CPU (NCIX Tech Tips #36)”, (YouTube), [Online April 6, 2006], https://www.youtube.com/watch?v=EdDccsbv5hA, (accessed April 19, 2014) slightly bent pins in CPU socket, what can be done?, Anandtech, [Online February 28, 2012], http://forums.anandtech.com/showthread.php?t=2229248, (accessed April 19, 2014)
Brain123, Olive48, Sachinsahrawat, “How to Solve a Problem”, (Wiki How), [Online], http://www.wikihow.com/Solve-a-Problem, (accessed April 20, 2014)
Also, I do not know if the issue is with either not being able to turn on the board or something to do with a function of the board (touch/display/video/ sound/etc). Per manufacturer's website, we should do the classic turn it on/off and remove any devices that had been recently plugged into the board. If that doesn’t resolve the issue, we should check to make sure the UPC/surge protector is working by plugging in another known working device (cell phone charger) just to make sure it’s not a power
You are required to do certain adjustments for operating a bending machine. Follow the adjustments given below to get desired results:
Torticollis is condition in which the neck is tilted backwards and twisted painfully. The head is usually inclined from a side while the chin is turned towards the opposite side. It is also called twisted neck. This situation can be inherited (present at birth). It can also be caused by damage to the muscles of the neck or of the blood supply problems. Sometimes torticollis resolves on its own. However, there exists the possibility of relapse.
THE SCREW THROUGH CINDER’S ANKLE HAD RUSTED, THE engraved cross marks worn to a mangled circle. Her knuckles ached from forcing the screwdriver into the joint as she struggled to loosen the screw one gritting twist after another. By the time it was extracted far enough for her to wrench free with her prosthetic steel hand, the hairline threads had been stripped clean.
Start out by braiding the base for your extensions. The base is the area that the exte...
locate the information that is required for an given problem. They also found that the
The topic of “solve math solutions manual”, are seen below with some related problems and solutions. In mathematics, there are many chapters included such as number system, fraction, algebra, functions, trigonometry, integral, calculus, matrix, vector, geometry, graph etc. We can understand how to solve the problems using formulas and some operations. Let us discuss some important problems below in different concepts.
Microprocessors and Angelic Self-possession: The microprocessors of today's computers are integrated circuits which contain the CPU on a single chip. The latest developments, with variable clock speeds now often exceeding 200 MHz, include Intell's Pentium chip, the IBM/Apple/Motorola PowerPC chip, as well as chips from Cyrix and AMD. The CPU chip is the heart of the computer; only memory and input-output devices have to be added. A small fan might be added on top of the fastest chips to cool them down, but in the chip itself there are no moving parts, no complex gaps between the movement being imparted and that which imparts the movement.
Graham Parker’s Structured Problem Solving Guide describes the problem solving process in four phases, one of which is Developing and Selecting Solutions (Phase 4). The other phases are not summarized here, however, it is noteworthy to mention that Phase 4 is the entering into solution development, whereas during the first three Phases of the process, specific problems of study have already been defined, a selection process is undertaken to decide which problems to address, and finally the problem to be studied is characterized by the collection and analysis of the data to be studied. We then pick up the process of developing solutions for addressing the problems identified in the previous phases, as we enter Phase 4.
The next step is putting the computer together. First you will need to put the
...unched in October 2011, the first products were FX-Series desktop microprocessors which were then followed by Opteron 4200 and 6200 server CPUs that were launched in November 2011.
Ever since I built my first computer early in 2012, I have had an avid interest in computing and technology. From hardware to software, I enjoy it all. I love everything about building computers, and I mean everything. From making the list of parts, to the Lego-like building process, to the final POST of the motherboard, I enjoy...
A processor is the chip inside a computer which carries out of the functions of the computer at various speeds. There are many processors on the market today. The two most well known companies that make processors are Intel and AMD. Intel produces the Pentium chip, with the most recent version of the Pentium chip being the Pentium 3. Intel also produces the Celeron processor (Intel processors). AMD produces the Athlon processor and the Duron processor (AMD presents).
What I knew about my computer was how to turn on and off by pressing the big button at the bottom of my computer. I turned on the computer and had no idea what to do next, but I was still happy. I just clicked on everything and did not know how t o go back to the previous screen. Whenever I had problems with my computer, I just turned off the computer. It was pretty simple to clear my computer problems by pressing the power switch. The power switch was a problem solver.
The internal parts of computers are very easy to recognize, once they are labeled. We will start by opening the case into the computer. Before opening the case don’t forget to have the computer turned off and unplugged, we don’t want to fry the computer parts. Once inside, we have a look around, and see a lot of parts that are unrecognizable to us. We will start from a top to bottom process of labeling parts. First look towards the bottom the big green board that everything else lies on is called the motherboard. A motherboard acts like the arteries of a human taking the blood all over allowing the blood places to travel, except the motherboard does this with electrical signals. The motherboard has three cards on it; they are the graphics card, sound card, and modem. They act like the voice, the eyes and the mouth of a human. You can tell the difference between them by how they connect in the back of the computer. The graphics card has a prong plug in, the sound card has a place where speaker plugs can go and modems have a place where you can put your phone line. Next to the left of the cards we see there is a little chip with a fan on top, this is the processor. The processor acts like the heart of a human sending blood all over the body, but instead of blood the processor sends electrical signals. Straight above the processor in the little slot is the hard drive. The hard drive acts kind of like the brain of the whole computer, by storing information on it and sending and receiving electrical signals. Finally we have the cd-rom. This is located above the hard drive. The cd-rom is the mouth of the human. But the cd-rom takes in data instead of food. Next on the motherboard is three little chips, sitting next to the processor, these are called Random Access Memory, or RAM. The ram acts like the quick storage in the brain it remembers the stuff that you are working on right then.